Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / gauge sensor placement

new reply
gauge sensor placement
02-09-2019, (Subject: gauge sensor placement ) 
Post: #1
Contributing V.I.P.tree98 Offline
Contributing V.I.P.  (1704 Likes)  ****

 		Posts: 2,920
Joined: May 2016
Thanks: 1012
Given 1704 thank(s) in 1071 post(s)
gauge sensor placement
I want to add a pyro to an L9 cummins. There's a good place on the exhaust pipe post turbo to put it but it's about 4" away from the doser. Is it going to read correctly with diesel spraying on it?

User's Signature: im_seeing_parameters_in_my_sleep 1
Return to Top | find
replyreply
02-09-2019, (Subject: gauge sensor placement ) 
Post: #2
Rawze Offline
Forum Reject  (13891 Likes)  *******

 		Posts: 10,977
Joined: Jun 2013
Thanks: 5877
Given 13891 thank(s) in 6063 post(s)
RE: gauge sensor placement
(02-09-2019 )tree98 Wrote:  ..
Is it going to read correctly with diesel spraying on it?

The fuel does not ignite until it hits face of the DPF typically.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
new reply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication