2013 PETERBILT CAB SHOCK REPLACEMENT.

[13petehoneytruck]

Copy using a lot of pb blaster. I soaked her down 6 times yesterday with penetrating oil. I got the other bolts out by grinding the ends down on both sides and prying out the old bolt. I do have room on both sides to grind down the bolt. Drilling is an option I did not consider. Just don't want to remove too much metal in the mount bracket itself by doing that though. That process I will think about. I am going to attempt my tie rod separator option in tandem with a punch and mallet. Still trying to figure out how to get pictures on this laptop from my phone. I will post a picture when I got it figured out. Thanks for your thoughts.