Forced regen face plug question

[Rawze]

(03-10-2019 )DosGatos Wrote:  cleared the faceplug fault. did the regen and dpf differential after was 0.0 with key on engine not running with idling pressure of 0.2 after the cook. Not sure where the 0.12 was coming from earlier. history is typical; between 2 and 13 hours between rolling regens. depends on load weight and speed.
the maximum pressures during rolling regens may be while pulling a hill. the parked regen looks better but was only 1100 rpm no load.
satisfied considering the miles and hours; a little over 20k hrs run time. Was a mega fleet truck with company drivers.

maybe you got it solved. All but the newest (topmost value) numbers down the right hand side don't look too good. Above 3.0 inhg is not so good in history.