Dpf can repair
03-16-2019, (Subject: Dpf can repair ) 
Post: #10
RE: Dpf can repair
Been doing it for a long time, cold water or sometimes wax. Depending on location the MiniDuctor provides flameless heat but is pricey. Also have a jewelers torch. Looks funny as hell but puts out a pinpoint flame up to 5000 degrees. Handle is the size of a majic marker. Good for side cutting turbo mounting nuts where access is tight.
replyreply
 Thanks given by: Magard , snailexpress , DSTdriver , LargeCar
03-17-2019, (Subject: Dpf can repair ) 
Post: #11
RE: Dpf can repair
Most likely its stainless steel
McMAster-Carr has stainless fittings
Maybe grind it down some & weld a new fitting over it

Let us know the outcome
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.