Base timing help
03-22-2019, (Subject: Base timing help ) 
Post: #12
RE: Base timing help
(03-22-2019 )Swaid25 Wrote:  Well got the timing down she was running smoothly for about 25 minutes. Then started knocking. Turned her off. Tried to bar over and can only get about 7/8 of a full turn. Barred backwards to repin crank and check timing. It did not slip she still in time. Pull rockers all values move and measure the same. Pulled injectors put camera in couldn't see any thing wrong but #6 had scared liner pulling head to see what's going on. Anyone have any information??

https://www.youtube.com/watch?v=LdTXWXKu...Zc_5ZwzDiw


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Swaid25


Messages In This Thread
Base timing help - Swaid25 - 03-19-2019,
RE: Base timing help - Swaid25 - 03-19-2019,
RE: Base timing help - hhow55 - 03-19-2019,
RE: Base timing help - tree98 - 03-19-2019,
RE: Base timing help - Swaid25 - 03-19-2019,
RE: Base timing help - Unilevers - 03-19-2019,
RE: Base timing help - Swaid25 - 03-20-2019,
RE: Base timing help - Swaid25 - 03-20-2019,
RE: Base timing help - Rawze - 03-20-2019,
RE: Base timing help - Swaid25 - 03-22-2019,
RE: Base timing help - Rawze - 03-22-2019
RE: Base timing help - Swaid25 - 03-23-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.