Excess blowby

[biscuits and gravy]

(05-17-2016 )hhow55 Wrote:  I also remember , that my coolant reservoir would pressure up.
That's a sure sign of a bad head gasket, or maybe a head gasket is bad on your engine compressor.
Try checking your air compressor first, by disconnecting the air line that goes to the air dryer, and see if this does the trick with the blowby. I think it would be possible for coolant to be finding its way to the compressor cylinders. .
Then pressure test the coolant reservoir, with engine at normal operating temp, to see if the coolant system on engine is pressuring up, this would be a sure sign of bad head gasket on motor.
Good luck

Good job hhow55.

Hopefully in2trux will be back on the road soon.