Replacing the air control valve - any software calibration needed?
04-25-2019, (Subject: Replacing the air control valve - any software calibration needed? ) 
Post: #1
Replacing the air control valve - any software calibration needed?
Hello,

./uploads/201904/post_3965_1556213458_07ce8c35d6273891c5200f46f58ac1d8.png

My air control valve (p/n 3597619) is leaking and I ordered a new one online. It arrived and was going to replace it but then started wondering if any software calibration is required when replacing this part. Can I just swap this thing out and be done or do I need to wait until I have access to Insight to do some sort of calibration?

Thanks
Jeff


User's Signature: 2003 CM870 ISX500/1650 in a 2004 Volvo VNL630. ~705k miles on engine
RV toter, non-commercial. 37k-40k lbs total truck & trailer. ~40k miles per year
replyreply
04-25-2019, (Subject: Replacing the air control valve - any software calibration needed? ) 
Post: #2
RE: Replacing the air control valve - any software calibration needed?
No software calibration required it's all plug and play.
replyreply
 Thanks given by: Rawze




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.