Program questions |
04-27-2019, (Subject: Program questions ) Post: #5 | |||
| |||
RE: Program questions im pretty sure ive got 7000 on that setting also. But this is more like in say 4th if i shift into it at around 1200RPM empty theres reallly no difference in acceleration than if im loaded to 80k lbs. i have turned Load Based Speed Control off as that was limiting my RPMs even when set to 1900RPM. I know i dont want it to feel like a racecar of a truck like my DD15 was at Crete as thats a bit to much lowend for liners. iam pretty far open on the turbo at idle around 34% closed is what it took to just get a peice of paper to flutter from air coming out on Intake side of engine. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Program questions - Lonestar10 - 04-26-2019, RE: Program questions - Nilao - 04-26-2019, RE: Program questions - Rtrucking - 04-26-2019, RE: Program questions - Magard - 04-27-2019, RE: Program questions - Lonestar10 - 04-27-2019 RE: Program questions - Lonestar10 - 05-01-2019, RE: Program questions - Nilao - 05-01-2019, RE: Program questions - Lonestar10 - 05-01-2019, RE: Program questions - ynot - 05-01-2019, RE: Program questions - Lonestar10 - 05-01-2019, RE: Program questions - Rawze - 05-02-2019, RE: Program questions - Lonestar10 - 05-02-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.