CM 871 won’t regen
05-05-2019, (Subject: CM 871 won’t regen ) 
Post: #16
RE: CM 871 won’t regen
I dont know if the voltages will tell you anything. it could be that IMAP sees say 28.7 KPA and Baro sees 28.7 KPA and then computer just subtracts 28.7 from the IMAP and shows a 0 Readout.

Rawze is the electrical enginerd here with his kick ass toys like his new Arduino for testing turbos he would know better.

Only type of sensors/valves im used to using have constant voltages and use a 0 to 20 milliamp scale to send out their data. so in the computer system there would be a scale like this.

Say the scale is 0 to 200 PSI
0 Milliamp = 0 PSI reading

10 milliamp = 100 PSI reading

20 milliamp = 200 PSI reading
replyreply
 Thanks given by: theironoracle


Messages In This Thread
RE: CM 871 won’t regen - Lonestar10 - 05-05-2019
RE: CM 871 won’t regen - Unilevers - 05-05-2019,
RE: CM 871 won’t regen - Unilevers - 08-07-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.