| CM 871 won’t regen |
| 05-09-2019, (Subject: CM 871 won’t regen ) Post: #39 | |||
| |||
RE: CM 871 won’t regen (05-09-2019 )theironoracle Wrote: Customer has asked me to reprogram their ISX 500 to perform like their ISX 525. They are vertically matched trucks and are used in the same hauls. They have owned them since new and always get drivers complaints about the power/torque in the ISX 525. If someone could steer me in the proper direction!!! NO, THOSE 2 ENGINES ARE NOT THE SAME AT ALL!!! --- NOT ONE DAMN BIT!!!... Comparing... ESN:79288635 - Program AV10105.xx (required for old DPf part#'s) / AV10277 (new DPF part#'s ) (525-HP) (CPL2919) - High tier engine, big injectors, larger HP cams, larger HP pistons, etc... with ... ESN: 79238536 - Program AV10051.xx (required for old DPf part#'s) / AV10243 (new DPF part#'s ) (500-HP) (CPL2733) - Mid-tier engine, smaller injectors, mid-tier cams, smaller tier pistons, etc... Besides the hardware incompatibilities, Looking at only the programming and comparing them, here is what I see at a glance... * the 2 programs are for 2 very different engine builds. There is nothing compatible with them at all, and they will not interchange. You should REALLY REALLY read article this before screwing with HP related stuff!... http://rawze.com/forums/showthread.php?tid=1&pid=1#pid1 - The only way to adjust that 500HP mid-tier engine to something more robust is to custom tune the HP and other settings in it. There is no factory program of higher HP that is compatible with it. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.