CM 871 won’t regen
05-10-2019, (Subject: CM 871 won’t regen ) 
Post: #42
RE: CM 871 won’t regen
(05-09-2019 )Rawze Wrote:  NO, THOSE 2 ENGINES ARE NOT THE SAME AT ALL!!! --- NOT ONE DAMN BIT!!!...

Comparing...

ESN:79288635 - Program AV10105.xx (required for old DPf part#'s) / AV10277 (new DPF part#'s ) (525-HP) (CPL2919) - High tier engine, big injectors, larger HP cams, larger HP pistons, etc...

with ...

ESN: 79238536 - Program AV10051.xx (required for old DPf part#'s) / AV10243 (new DPF part#'s ) (500-HP) (CPL2733) - Mid-tier engine, smaller injectors, mid-tier cams, smaller tier pistons, etc...

Besides the hardware incompatibilities, Looking at only the programming and comparing them, here is what I see at a glance...

* the 2 programs are for 2 very different engine builds. There is nothing compatible with them at all, and they will not interchange. You should REALLY REALLY read article this before screwing with HP related stuff!...

http://rawze.com/forums/showthread.php?tid=1&pid=1#pid1

- The only way to adjust that 500HP mid-tier engine to something more robust is to custom tune the HP and other settings in it. There is no factory program of higher HP that is compatible with it.


Now what? Do you suggest this tune? If not how do I get the custom tune? I am still very green with Insite.

As far as firing the driver I spent my twenties as an equipment/shop manager for a construction company. I fired more people than everyone else put together. I finally realized my tolerance level for stupidity was not where it needed to be so I quit. I went out on my own and only hire some "labor" for large projects that require lots of cleaning or climbing.
replyreply


Messages In This Thread
RE: CM 871 won’t regen - Unilevers - 05-05-2019,
RE: CM 871 won’t regen - theironoracle - 05-10-2019
RE: CM 871 won’t regen - Unilevers - 08-07-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.