Fan clutch stuck? The tool I used to fix.
05-30-2019, (Subject: Fan clutch stuck? The tool I used to fix. ) 
Post: #9
RE: Fan clutch stuck? The tool I used to fix.
Mr. Loo there may be a psi reducer before the solenoid or the solenoid itself may reduce the pressure to only 90 psi. They don't need more than that to operate and International is known to put reducers in line for a lot of things.

Mr. Hagg is spot on to what I do. Some times you don't even need to take the plates all the way off. Just loosen them enough to get the clutch disc to move and spin the fan by hand to break up any rust. Then tighten the plates back down.
replyreply
 Thanks given by: Waterloo , Rawze , multitask


Messages In This Thread
RE: Fan clutch stuck? The tool I used to fix. - Chamberpains - 05-30-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.