Timing

[smorgan87]

If ur injector cam slipped it should retard injector time if im thinking right (engine kept going, cam didnnt so it should lose a degree or 15 but theres no telling where ur static time is at now and trying to compensate in soi tables or master soi is a shot in the dark because a cpl degrees in either direction can make a big difference. What gives u the idea it slipped? Is ur mm updated to the most recent version with the set soi tables? Egts snd prty normal maybe a few degrees cool on a hard pull but real close. Whats ur torque set at and where in the rpm range? Injectors good? Fueling actuators good?