Rear structure
06-25-2019, (Subject: Rear structure ) 
Post: #17
RE: Rear structure
(06-25-2019 )Hammerhead Wrote:  ..
I took Mr Hagg's advise and applied a liberal coating of anerobic gel to the gasket when I did mine. I assure you that the gel will do more than that pissant rubber strip to ensure a long lasting seal.

(06-25-2019 )Rawze Wrote:  mis-use that gel though, and you could kiss your engine goodbye,as that stuff is as hard as rock-candy when it dries. Just a warning for others who are less familliar with over-using gels and sealants on gaskets that don't normally need it.

Yes, let me clarify, by "liberal coating" I mean full surface film coverage, not dripping gobs of excess.


User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
replyreply
 Thanks given by: Waterloo


Messages In This Thread
Rear structure - earnies2 - 06-23-2019,
RE: Rear structure - Waterloo - 06-23-2019,
RE: Rear structure - earnies2 - 06-23-2019,
RE: Rear structure - earnies2 - 06-24-2019,
RE: Rear structure - Waterloo - 06-24-2019,
RE: Rear structure - Waterloo - 06-25-2019,
RE: Rear structure - Rawze - 06-25-2019,
RE: Rear structure - Hammerhead - 06-25-2019
RE: Rear structure - Rawze - 06-24-2019,
RE: Rear structure - Waterloo - 06-24-2019,
RE: Rear structure - earnies2 - 06-24-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.