Kenworth T800 rear engine mounts

[Rawze]

(06-28-2019 )Andre_The_Giant Wrote:  Does anyone know the torque spec? I still can’t find any info on it, i would love to torque it

I was just about to point this out. - I would have been off the rails if that were my truck and no one used a torque wrench on every one of those bolts.

Those 10.9 LE bolts (look like they are roughly max 320 ft-lbs (assuming they are 20mm, they look like it in the pics). Would depend on the shank size. If they are the 20mm type, 275 with loc-tite would be acceptable. A phone call to the truck maker should answer it definitively though.