Thermo King Help |
05-29-2016, (Subject: Thermo King Help ) Post: #4 | |||
| |||
RE: Thermo King Help (05-29-2016 )ashdan2010 Wrote:(05-28-2016 )Unilevers Wrote: connect gauges to the unit (suction side service valve on top of compressor, high side on discharge where the small discharge vibe meets the compressor). take the caps off the service valves and screw the stems in about 3 turns. DO NOT BOTTOM THE STEMS OUT.Unilevers I've attached a photo of my compressor with colored arrows. Can you tell me which ports i will be using. Just want to make sure I'm doing it right. Also I toggled thru the key pad and did not see a vac mode. Is there something else I need to do to put it in vac mode. blue is high side/discharge, red is low side/suction. it has been awhile since i had to put one in vac mode - i believe on a SR2 control you hit the menu button and the blank spot button at the same time and hold and it goes to a configuration mode where one of the options is evac mode. ill look it up and let ya know. if its a older model you hit the TK symbol and the up arrow at the same time to get to config mode. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Thermo King Help - ashdan2010 - 05-28-2016, RE: Thermo King Help - Unilevers - 05-28-2016, RE: Thermo King Help - ashdan2010 - 05-29-2016, RE: Thermo King Help - Unilevers - 05-29-2016 RE: Thermo King Help - ashdan2010 - 05-29-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.