ISX oil leak

[TallBoy441]

(08-14-2019 )Baco74 Wrote:  I have 05 cm 870,just over 1.3 mi. My start to leak between gear housing and block also on front seal . It's big job but take, your time . On the front also I change both idler gears and thrust bearing, top side pull cams out change bushings, valve seals, injector o-rings,run overhead,and new harmonic balancer....

Mine has just over 1 mil miles and appears to be leaking at front gear housing, crank seal & some minor seepage at the cam seals. I was thinking it would be best to change the cam bushings, and a few other things while it’s tore apart, maybe same some problems down the road. I got pin, wedges & gear puller. What else do I need to pull the cams ?