Cm 870 cry for help
08-03-2019, (Subject: Cm 870 cry for help ) 
Post: #36
RE: Cm 870 cry for help
I will say this if you had cpl 8519 and current 8520 and using ECM from old engine your biggest problem your facing is camshaft timing. 8519 is 4 degrees on injector cam and 8520 is 6 degrees so if you used a file for the 8519 i could see a real issue.
replyreply
 Thanks given by: Rawze , redbeard


Messages In This Thread
RE: Cm 870 cry for help - Unilevers - 08-01-2019,
RE: Cm 870 cry for help - Mr Hagg - 08-03-2019
RE: Cm 870 cry for help - Unilevers - 08-03-2019,
RE: Cm 870 cry for help - Unilevers - 08-09-2019,
RE: Cm 870 cry for help - ynot - 09-15-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.