Pete/KW front suspension
08-15-2019, (Subject: Pete/KW front suspension ) 
Post: #13
RE: Pete/KW front suspension
Check your actual mount bolts. If the spring pin is tight and the locking cross bolts are tight and good the actual spring hanger mount maybe moving.

Jack the front end up off the ground an inch or so and get a big.... scratch that.... a huge pry bar and start moving things around.
replyreply
 Thanks given by: Andre_The_Giant


Messages In This Thread
RE: Pete/KW front suspension - Chamberpains - 08-15-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.