Governor Settings
09-01-2019, (Subject: Governor Settings ) 
Post: #7
RE: Governor Settings
I had a similar tune by Rawze in which he set up lower torque as it was a high mile engine and had most of the power in the higher end. I never noticed a big issue with it as I have 4:11 gears on 11r22.5 rubber. If you've got tall gears then it may be more of a issue.

I did however notice a huge difference between this tune and the 625 overlay with savage torque instantly..... so if you had it tuned previously and then went to this program, it may not be to your liking. The man tunes conservatively because he IS NOT about getting there fast, hes about helping people keep their trucks together to maximize profits and the last thing he needs is to put a bunch of tunes out there that he doesnt want to do and then have guys coming on here complaining when thier motors piled up.


User's Signature: I'm no mechanic, I'm just a guy that breaks down enough to know a bit.
replyreply
 Thanks given by: MageRoyal , Rawze


Messages In This Thread
Governor Settings - NoTime - 09-01-2019,
RE: Governor Settings - Rawze - 09-01-2019,
RE: Governor Settings - Magard - 09-01-2019,
RE: Governor Settings - NoTime - 09-01-2019,
RE: Governor Settings - NoTime - 09-01-2019,
RE: Governor Settings - Brock - 09-01-2019
RE: Governor Settings - NoTime - 09-01-2019,
RE: Governor Settings - Brock - 09-02-2019,
RE: Governor Settings - NoTime - 09-02-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.