06 CM870 450 ISX egr tuneup
09-25-2019, (Subject: 06 CM870 450 ISX egr tuneup ) 
Post: #15
RE: 06 CM870 450 ISX egr tuneup
   ./uploads/201909/post_2980_1569463251_40eaea874a72e198469710be36532d6b.jpeg./uploads/201909/post_2980_1569463271_2bb4afbcd73ca650742b0cac93585fc5.jpeg
I have a dumb question. Bear with me I’m on the road and am not gonna start taking things apart until I’m at the shop again.

I was able to grab the fitting from Cummins in the USA, but it’s a male/male fitting. I picked up a female compucheck fitting while I was there, too.

So...do I unscrew the fitting from the actuator...install this fitting to perform the stroke test? I went back and reread the instructions from Cummins on how to perform the test, but it’s not clear

Then the next question, how do I pressure test the line between the actuator and the actuator controller?


User's Signature: I have no idea what I’m doing and probably need supervising
replyreply


Messages In This Thread
RE: 06 CM870 450 ISX egr tuneup - DDlighttruck - 09-25-2019
RE: 06 CM870 450 ISX egr tuneup - Unilevers - 09-30-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.