Last straw
09-25-2019, (Subject: Last straw ) 
Post: #28
RE: Last straw
(09-25-2019 )Rawze Wrote:  
(09-25-2019 )Lonestar10 Wrote:  Okay my GPS should be better now going to Silver Grove Kentucky to load delivering in Alpharetta Georgia is that a better route? Lol

Next item who knows where a good place to park near Griffin for the weekend?

Mr. Hag would most likely let you park trailer at his shop for the weekend if he has the space for it. Call him to make sure.

there is also trailer parking less than 1 mile from my house. they charge $10/day. Text me a request for the address/directions if you need to park at the paid lot. If you park there, you can bobtail and park in my driveway if u like while waiting for Mr. hag's appointment.

Never pass up the opportunity to visit the Rawze compound. Not only is he a damn good mechanic, he had to be a chef in a former life.
replyreply
 Thanks given by: Waterloo , dhirocz , Nostalgic
09-25-2019, (Subject: Last straw ) 
Post: #29
RE: Last straw
So I've heard lol. Just might be Scarry if he happens to start peeken at stuff I've done my damnedest to replace anything and everything I've found that doesn't look, sound, or seem quite right.

Biggest problem now is one of my drive axle fenders broke the bolt in the mounting stud I thought it was threaded so bought a bolt and found out I was wrong so it's currently got some tarp straps clamping it to frame till I get a nut.


User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder
replyreply
09-26-2019, (Subject: Last straw ) 
Post: #30
RE: Last straw
Hi ho hi ho it's off to Georgia we go


Attached File(s)Thumbnail(s)
   


User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder
replyreply
09-26-2019, (Subject: Last straw ) 
Post: #31
RE: Last straw
(09-25-2019 )Lonestar10 Wrote:  So I've heard lol. Just might be Scarry if he happens to start peeken at stuff I've done my damnedest to replace anything and everything I've found that doesn't look, sound, or seem quite right.

Biggest problem now is one of my drive axle fenders broke the bolt in the mounting stud I thought it was threaded so bought a bolt and found out I was wrong so it's currently got some tarp straps clamping it to frame till I get a nut.

Pack a lunch if you let Rawze inspect. You will feel about this big ' ' once he is through with you, LOL! Put your big boy pants on and be ready to eat some humble pie. And it is all good, because a second set of eyes on your rig is a good thing. Trust me on that, Rawze has an eye for little details, that is what he did and still does, the man is a perfectionist and the best friend us guys will ever have, and you can take that to the bank.
replyreply
 Thanks given by: Rawze , Hammerhead , redbeard
09-26-2019, (Subject: Last straw ) 
Post: #32
RE: Last straw
Mommy!


User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder
replyreply
 Thanks given by: Hammerhead , hhow55 , redbeard , Waterloo , smorgan87 , Brock
09-27-2019, (Subject: Last straw ) 
Post: #33
RE: Last straw
Made it to me haha for some trailer parking now just waiting for rawze to hit me back on some bobtail parking.


User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder
replyreply
09-27-2019, (Subject: Last straw ) 
Post: #34
RE: Last straw
Dig into your wallet and have Rawze run you up to the grocery store, you want fresh salmon fillets, big ones, a case of Casa Modelo and whatever else your little heart desires...
replyreply
09-28-2019, (Subject: Last straw ) 
Post: #35
RE: Last straw
Welp go figure rawze puts his magic eyeballs to work for 20 minutes. and lo and behold valve cam has slipped around 6 degrees.


User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder
replyreply
09-28-2019, (Subject: Last straw ) 
Post: #36
RE: Last straw
(09-28-2019 )Lonestar10 Wrote:  Welp go figure rawze puts his magic eyeballs to work for 20 minutes. and lo and behold valve cam has slipped around 6 degrees.

What would cause it to do that?
replyreply





  
  
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication