Cummins x15 torque spec
10-16-2019, (Subject: Cummins x15 torque spec ) 
Post: #6
RE: Cummins x15 torque spec
(10-16-2019 )Waterloo Wrote:  35 ftlbs... It is right there in the oil pan installation instructions, bottom of page...

I don't know if you know about the Fumoto oil drain valves, but many of us here use them. I won't leave home without mine, lol. They are grease monkey proof, and made of solid brass. I have been using mine for quite a few years.

Here are the ones available for our Cummins oil pans... I use the 2-T11

http://fumotousa.com/results.php?make=14...X%2C+QSX15

You can get these at FleetPride, Amazon and I have seen them at a few dealership parts departments. Torque to 35ftlbs
Brother just take out the oil drain plug and put it on. Does it need special wrench. I don't want to over tighten it. Lol
replyreply


Messages In This Thread
RE: Cummins x15 torque spec - bigben - 10-16-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.