What would you have done differently??
12-20-2020, (Subject: What would you have done differently?? ) 
Post: #160
RE: What would you have done differently??
(11-22-2020 )Chamberpains Wrote:  I figured I'd try to keep life in this thread. Its truly a good one for open air freight guys.

I ran up behind this clown on the Baltimore beltway last week.


If you can't see how disgustingly wrong this is than you should never think about hauling flatbed freight.

On a very minor bump I watched the rebar flex to about 1 foot from the ground.

Anyone care to explain what all is wrong in this guy load?

I was fired from an outfit up in ND for refusing to haul a load of rebar like that... It was loose, hundreds, two hundred just thrown on a gooseneck, all over the place and a good 6 feet hanging off the rear end and no way to properly secure. They wanted it moved 100 miles, and no, I did not load it, but I sure was fired! Which was fine with me, had another job in short order.


User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields.
replyreply
 Thanks given by: Rawze , JimT


Messages In This Thread
RE: What would you have done differently?? - Waterloo - 12-20-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.