Pressure testing CM870

[DDlighttruck]

(11-03-2019 )Waterloo Wrote:  

(11-03-2019 )DDlighttruck Wrote:  

(11-02-2019 )Mattman Wrote:  How do you have the other end of the system blocked off. Pictures are great, need more of them.

Maybe a list of what all is needed to do this.
My truck will only make 30psi of boost, need to check mine.

That’s what I made up. Couple pieces of 4” exhaust pipe, with the ends capped. One end I had a bung welded in for an airline fitting. That should do the CAC.

The other piece for the turbo is just a turbo exhaust flange.

I used air line fittings and a pressure regulator from Napa and made my own pressure tool

I need to learn how to weld...

$10 at the exhaust shop for the 4” pipe and plugs.... $25 for the welder down the road to TIG weld the plugs in and weld in the bung for me...