Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Leaking diaphragm... AGAIN.

new reply
Leaking diaphragm... AGAIN.
11-14-2019, (Subject: Leaking diaphragm... AGAIN. ) 
Post: #15
Evotrucker Offline
Established  (189 Likes)  **

 		Posts: 425
Joined: Mar 2018
Thanks: 130
Given 189 thank(s) in 105 post(s)
RE: Leaking diaphragm... AGAIN.
(11-14-2019 )Chamberpains Wrote:  Pd6cas2, We may be talking about the same thing but just to be clear
This blow up is for a CM570


Part # 25 is what Evotrucker posted originally. I believe it's where I have the green arrow pointing in the picture below. Are you referring to where I have the Pink arrow as a filter also? That looks similar to a pressure reducer/regulator I have for my air turbo actuator. I've never pulled and IFSM on a CM570 apart. I'm going off of quickserve alone.

I dont remember seeing one like that on my IFSM but its what it should on my quickserve maybe i accidentally used the blueprints for the cm570 by accident.

User's Signature: The creator said " Help your self and I will help you; Protect your self and I will protect you "
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Leaking diaphragm... AGAIN. - Evotrucker - 11-14-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication