Help with Webasto
11-28-2019, (Subject: Help with Webasto ) 
Post: #1
Help with Webasto
./uploads/201911/post_1778_1574959533_52093ab4be0322026ab84c243f8f7d00.jpeg   If perhaps someone here could assist me with this; My Webasto coolant heater locks out and won’t start many times without pulling the fuse and clearing the fault. Then it usually runs fine.
I bought this connector with the program to be able to see what the problem is and correct it.
I’m not an expert, and can’t find any instructions for how to hook this up. They say this is all I need to diagnose. Its a usb to OBD II. That connects to the three alligator clips. One is power, one is ground. The other goes to one of the posts, but not sure which. Or just how to go about it.
Thought maybe someone here might know. Thanks.
replyreply
11-28-2019, (Subject: Help with Webasto ) 
Post: #2
RE: Help with Webasto
First google suggestion https://www.butlertechnik.com/downloads/...al_(2).pdf
replyreply
 Thanks given by: Mrkentee
11-28-2019, (Subject: Help with Webasto ) 
Post: #3
RE: Help with Webasto
(11-28-2019 )snailexpress Wrote:  First google suggestion https://www.butlertechnik.com/downloads/...al_(2).pdf

That is for someone that has all the factory recommended connectors, etc. What I have is much more basic. The seller got back to me and gave me instructions. Thanks.
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.