05 VNL hood repair
11-28-2019, (Subject: 05 VNL hood repair ) 
Post: #2
RE: 05 VNL hood repair
I am no professional at it, but I am not half bad, can do it at least the right ways.

Its fairly easy to fix fibreglass hoods. I have fixed mine many times in the past, even once from major deer strike took out whole front of it into pieces. I have also shown many people on theirs how to do themselves who have come here.


The tricks are...

* properly grind out the area to be patched before laying in any new fibreglass. there is a certain method for this and if not done in a certain way, the patch will not hold properly.

* Using multiple layers of painters tape on one side as a backing across all gaps to lay the new glass into.

* using the right type of matting. For hoods, random, rough matting is best type. It gives strength in all directions and is same style as hood was made of originally.

* NOT using too much resin. this is most people's mistake. -- Too much resin == the repair will not have enough give to it and it cracks again later.


------------------------------
-- Grinding out the area properly is the biggest mistake ppl make when doing repairs and it will not hold for s$it if this is not done right. I am not talking about getting it clean (that is easy to figure out),.. but about the proper angles, shape of the grind, etc.

-- Next is too much resin, and it cracks again later under any kind of stress.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Evotrucker


Messages In This Thread
RE: 05 VNL hood repair - Rawze - 11-28-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.