Overshot's Blog |
08-26-2016, (Subject: Overshot's Blog ) Post: #32 | |||
| |||
RE: Overshot's Blog (08-25-2016 )Mr Hagg Wrote: Yes we have been doing alot of work on this thing. What start as a simple exhaust manifold gaskets. We found oil in all exhaust ports.. But 3 stood out bad. At this point we decided to do valve guide seals. If you look at the picture A&B ar exhaust valves. You can see that the valve seal are not touching the guide at all. THere where just riding up and down on the stem. This allowed oil to inter the exhaust. This also was the rease if he let it set idle for a long time when he took off smoke would come out then clear up. If you look at C this is on the intake and what it should look like. Yea, I forgot about the dampner. | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.