Fuel in oil

[Nostalgic]

(01-11-2020 )Joker0916 Wrote:  Still looks to be making oil. I replaced all the injector o rings. Anyone know torque spec on the four long bolts holding injection pump on? Also on the fuel filter housing anywhere fuel and oil could mix? Thnx

58 inch lbs, in sequence top right, bottom left, bottom right, top left.

Then 115 inch lbs, same sequence.

When you put dye in, did it show up coming from the gear area on the cam?

The IFSM carries oil from a port on the head to feed the fuel pump gear. There are fuel passages around it, and I suppose it's possible the IFSM could be cracked, but I don't know how, unless it was a defect in the IFSM or someone tightened the top bolt down with an impact.

How did the surface look when you changed the pump? I assume you used a new gasket - one should have come with the pump.