ProStar CM871 Turbo (Before Milk2) |
01-25-2020, (Subject: ProStar CM871 Turbo (Before Milk2) ) Post: #19 | |||
| |||
RE: ProStar CM871 Turbo (Before Milk2) (01-25-2020 )Rawze Wrote: tbw: even if you plan on de-mandating it and gutting that system off it ... Here is a Google Link to my engine photos and video-> https://drive.google.com/open?id=1312NN6...TA-W3N8ttb The only sensor I've managed to clean so far is the IMAP sensor. It came out easily and had a few crumbs of soot on it that i brushed away. I reinstalled it, and still ordered a new one and an exhaust pressure sensor as well. I've tried taking out the manifold to check that, but the bolt are on too tight to remove it by hand. I also tried removing the dpf, but the nuts on the clamps wont budge. I may have to take bolt-cutters to them and buy new ones. Though I prefer not to so that nothing looks out of place. Photos of DPF-> https://drive.google.com/open?id=153e7Hn...PCBgxuGwE_ | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.