Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / ECM CALIBRATION

new reply
ECM CALIBRATION
02-08-2020, (Subject: ECM CALIBRATION ) 
Post: #6
Contributing V.I.P.Chamberpains Offline
Contributing V.I.P.  (2773 Likes)  ****

 		Posts: 2,312
Joined: Jan 2018
Thanks: 1172
Given 2773 thank(s) in 1446 post(s)
RE: ECM CALIBRATION
Is your Insite level unlocked to Pro or Basic? Basic wont flash. Pro will.

I'm not finding your 1845 code. Make sure that's the correct number

1883 is on the list WATERLOO posted and is the same as a cm2350


Code 5868 comes up with a TSB. The link for quickserve is in the last paragraph. It has something to do with using too high of a sulphur content fuel.

http://marketing.sites.cummins.com/6-17-...ampaignId=
Return to Top | find
replyreply
new reply


Messages In This Thread
ECM CALIBRATION - catnred - 02-07-2020,
RE: ECM CALIBRATION - Waterloo - 02-08-2020,
RE: ECM CALIBRATION - JimT - 02-08-2020,
RE: ECM CALIBRATION - catnred - 02-08-2020,
RE: ECM CALIBRATION - Waterloo - 02-08-2020,
RE: ECM CALIBRATION - JimT - 02-08-2020,
RE: ECM CALIBRATION - catnred - 02-08-2020,
RE: ECM CALIBRATION - Rawze - 02-09-2020,
RE: ECM CALIBRATION - catnred - 02-13-2020,
RE: ECM CALIBRATION - Rawze - 02-14-2020,
RE: ECM CALIBRATION - catnred - 02-16-2020,
RE: ECM CALIBRATION - Chamberpains - 02-08-2020
RE: ECM CALIBRATION - Rawze - 02-08-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication