Isx 2350 485hp. Surges has no power
02-13-2020, (Subject: Isx 2350 485hp. Surges has no power ) 
Post: #14
RE: Isx 2350 485hp. Surges has no power
(02-13-2020 )LLT Wrote:  Thanks I will change the IMAP.

What should I check for the fuel pressure drop? I performed the test like you did on the video but mine went from 29,000 to 5500 in 60 seconds

Wow, that's a massive pressure drop! I just tested my cm2250 and I didn't lose a single PSI.

Unless you find some kind of external leak, coupled with your surging issue I would be looking for a leaking injector.

Also, if you haven't done so already, you need to open up and rebuild the fuel pump head. That too could be a source of the pressure loss.

There are a few other spots that could cause the pressure drop, but I haven't had the good fortune to learn about them yet.

Also, while not directly related, if your sensors were that clogged up you probably need to do a full EGR tune-up. If you find the aftertreatment injector leaking fuel into the exhaust than that could be another source of pressure loss, though probably due to a faulty shutoff valve.


User's Signature: "...And as we wind on down the road, Our Shadows taller than our Soul..."
replyreply


Messages In This Thread
RE: Isx 2350 485hp. Surges has no power - JimT - 02-13-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.