A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.
YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.
(02-13-2020 )Rawze Wrote: will it pass this injector leak test?
how many psi does it loose in one minute?.
0 psi loss. Baseline was like 29,890 or something. When I shut the engine off it jumped to 30,500psi or so, then ended the test just over 31,000psi. It continued to hold that pressure until the engine was restarted about 5 minutes later.
Edit: this test was performed less than a week prior to the first occurrence. I'm currently heading to get fingerprinted for cdl/hazmat renewal so I can try it again later if needed.
Make sure you are not fooled. When you do this test do you have DATA MONITOR/ LOGGER open? You need to hit START/RESUME button sometime as data live monitoring will freeze once you stop engine and still freeze after ignition ON. My did it. I was proud how my fuel system is tight until realize data is frozen.
