Replacing oil pump (should I do the dime mod?)
02-14-2020, (Subject: Replacing oil pump (should I do the dime mod?) ) 
Post: #14
RE: Replacing oil pump (should I do the dime mod?)
(02-14-2020 )Soulreaver0102 Wrote:  What shop did you take it to? Dealer will only do what Cummins has listed in the bulletin unless you state to do something different. This will include new oil pump. New main and rod bearings. New oil cooler. New fuel pump. And 2 oil changes. One to flush and 2nd will be what you leave on. Looking at at least $15,000 just for that. I’ve been there. My 2250 did that. But was no where near what you got going on in that pan. I lucked out. Mine just started to flake off and set my light off. No chunks of metal

I towed to a shop here in Rome GA. They do a lot of inframes and out of frames but I don't think he has dealt with this before. I'm worried to death.
replyreply


Messages In This Thread
RE: Replacing oil pump (should I do the dime mod?) - Billy7871 - 02-14-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.