How much gear lube to add?
07-06-2016, (Subject: How much gear lube to add? ) 
Post: #4
RE: How much gear lube to add?
18" on a manometer is Cummins spec? Seems like a very high number.

Take a look a Rawzes video of their engine, cams at 1M miles and he's been using it since new.
I try to replicate success and just started adding it again after 5000 miles on our inframe.
All the bearings that came out of our engine looked great at 670k, no copper showing.

It is cut 11:1 and at 210-220 degrees it is still thin. I'm seeing only a 10 psi drop between cold and hot, with a shimmed pump.


User's Signature: 2010 386 Pete CM871, 13 spd. 3.55
replyreply


Messages In This Thread
How much gear lube to add? - Pirate_Freder - 07-06-2016,
RE: How much gear lube to add? - Pirate_Freder - 07-06-2016,
RE: How much gear lube to add? - in2trux - 07-06-2016
RE: How much gear lube to add? - Pirate_Freder - 07-10-2016,
RE: How much gear lube to add? - Pirate_Freder - 07-10-2016,
RE: How much gear lube to add? - Pirate_Freder - 07-10-2016,
RE: How much gear lube to add? - Pirate_Freder - 07-10-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.