2350 fuel rail decay
03-05-2020, (Subject: 2350 fuel rail decay ) 
Post: #19
RE: 2350 fuel rail decay
well idk what resealed means unless its new orings or something but i would guess either the feed tube wasnt installed right or those injectors are internaly fubar.


User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s - skateboarder
replyreply
03-12-2020, (Subject: 2350 fuel rail decay ) 
Post: #20
RE: 2350 fuel rail decay
Update
I changed out #2 and #6 injector tan decay test and it dropped about 3-500 psi in 3 min so that is fixed but I still need to figure out how to get the program pulled out so I can get it sent over to Rawze to be gone over so I know what I’ve got good bad or indifferent but I’m not super savy with the computer lol
replyreply
03-13-2020, (Subject: 2350 fuel rail decay ) 
Post: #21
RE: 2350 fuel rail decay
(03-12-2020 )Jokerone33 Wrote:  Update
I changed out #2 and #6 injector tan decay test and it dropped about 3-500 psi in 3 min so that is fixed but I still need to figure out how to get the program pulled out so I can get it sent over to Rawze to be gone over so I know what I’ve got good bad or indifferent but I’m not super savy with the computer lol
Just friendly reminder, did you change injectors codes in Insite?
replyreply
 Thanks given by: Jokerone33
03-13-2020, (Subject: 2350 fuel rail decay ) 
Post: #22
RE: 2350 fuel rail decay
(03-13-2020 )snailexpress Wrote:  
(03-12-2020 )Jokerone33 Wrote:  Update
I changed out #2 and #6 injector tan decay test and it dropped about 3-500 psi in 3 min so that is fixed but I still need to figure out how to get the program pulled out so I can get it sent over to Rawze to be gone over so I know what I’ve got good bad or indifferent but I’m not super savy with the computer lol
Just friendly reminder, did you change injectors codes in Insite?

Yes I did thanks
replyreply
03-13-2020, (Subject: 2350 fuel rail decay ) 
Post: #23
RE: 2350 fuel rail decay
(03-13-2020 )snailexpress Wrote:  Just friendly reminder, did you change injectors codes in Insite?

^^ Such a legit question....when I first purchased my truck, not one injector code was correct after the engine was replaced.


----> The same 'mechanic' (lmao) also told me that 2250/2350 injectors were the same and could be interchanged if one were to fail...hmmmmmm
replyreply
 Thanks given by: snailexpress
03-14-2020, (Subject: 2350 fuel rail decay ) 
Post: #24
RE: 2350 fuel rail decay
(03-13-2020 )SquareOne Wrote:  ...
----> The same 'mechanic' (lmao) also told me that 2250/2350 injectors were the same and could be interchanged if one were to fail...hmmmmmm

not so at all.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
03-14-2020, (Subject: 2350 fuel rail decay ) 
Post: #25
RE: 2350 fuel rail decay
(03-14-2020 )Rawze Wrote:  
(03-13-2020 )SquareOne Wrote:  ...
----> The same 'mechanic' (lmao) also told me that 2250/2350 injectors were the same and could be interchanged if one were to fail...hmmmmmm

not so at all.

Yep ^^, you explained that to me in detail when I was over at the compound last year upon first purchasing my truck.... Just a shame how many uninformed 'professionals' exist out there.

It's acceptable to be ignorant on a topic...ignorance can be repaired by educating oneself on the matter at hand. Now stupidity....thats a whole other discussion. 'You can't fix stupid' is displayed amongst many of those so called 'professionals' at other's expense...
replyreply





  
  
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication