Cm 870 oil temp gauge
04-22-2020, (Subject: Cm 870 oil temp gauge ) 
Post: #5
RE: Cm 870 oil temp gauge
(04-21-2020 )Craag Wrote:  Tried searching not finding anything really oil temp sensor related on the entire internet. Lots of oil pressure sensor video replacement guides..

My temp gauge (05 International 9900) is not working it's just flatlined. Now if this wasn't working or had a broken wire or the temp sensor was shot would this not throw a code or cause a shutdown?Or am I looking at a working sensor but the gauge or wiring isn't functional?

I know if my coolant gets too hot warnings come on the dash.

Finally is this sensor located beside oil pressure sensor behind the fuel filter area? I'm assuming it is as it's the hardest one to get at lol.

Thanks in advance![/align]

you did not search entire internet... you missed the biggest site of them all .. the engine makers site ...

register your engine on quickserve.cummins.com -- All manuals, drawings, diagrams,. etc. for your engine are there .... for free.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
Cm 870 oil temp gauge - Craag - 04-21-2020,
RE: Cm 870 oil temp gauge - Rawze - 04-22-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.