Loss Of Accelerator Input

[Signature620]

Thanks Rawze, I'll have a better dig in CT next time I see the truck.

It's a COE and the accelerator has been rewired from the pedal to the ECM with no bulkheads/connectors/etc in between.

I have monitored the ABS with Bendix software as the fault occurs to see if it's related but all wheel speeds are in range and there's no ABS faults.

This truck doesn't have anything else on the datalink. It's a manual, doesn't have stability cntrl and doesn't have a body module. The only thing that would've been multiplexed was the regen switch but that's out of the picture now.