CAT ET Software (and head problems)
05-03-2020, (Subject: CAT ET Software (and head problems) ) 
Post: #8
RE: CAT ET Software
i pulled the cylinder head this afternoon. I pressure tested the intake again, and it seems to be holding air better now that the head is off. Still leaking down, but #4 cylinder intake valves seems to be the worst. If you push on it slightly side to side, there is some movement, and it leaks bad. not sure if that's been my problem or not. I'm thinking the valve guides are worn, or were no good from new?
replyreply


Messages In This Thread
RE: CAT ET Software - Rawze - 04-26-2020,
RE: CAT ET Software - Rawze - 04-27-2020,
RE: CAT ET Software - tsolson - 04-30-2020,
RE: CAT ET Software - Rawze - 05-01-2020,
RE: CAT ET Software - tsolson - 05-01-2020,
RE: CAT ET Software - tsolson - 05-03-2020
RE: CAT ET Software - tree98 - 05-03-2020,
RE: CAT ET Software - tsolson - 05-03-2020,
RE: CAT ET Software - Rawze - 05-04-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.