Into the @m*m^2

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 05-02-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Into the @m*m^2

05-06-2020, (Subject: Into the @m*m^2 )

Post: #11

Rawze

Online

(Online)
Forum Reject (13907 Likes)

Posts: 11,000
Joined: Jun 2013

Thanks: 5889
Given 13907 thank(s) in 6073 post(s)

RE: Into the @m*m^2

(05-06-2020 )kozakvod Wrote: I added, at your suggestion, that second clamp up closer to the end of the probe.

What others are saying have to do with actual exhaust temps, not heat soak. There is a difference there between the 2.

With the probe on the outside, your measuring heat soak, not manifold temps. I (and many others) prefer monitoring heat soak instead of EGT's for watching overall turbo temps and for fuel mileage savings. Longevity of the turbo and fuel savings has the most impact with regards to monitoring exhaust temps once the engine is performing up to spec.

I have not seen any issues with what you describe so far outside of the boost needing to be lowered a bit when you get a chance, so I would not worry too much about it.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.

Return to Top | find

Thanks given by:

« Next Oldest | Next Newest »

Messages In This Thread

Into the @m*m^2 - kozakvod - 05-05-2020,

RE: Into the @m*m^2 - hookliftpete - 05-05-2020,

RE: Into the @m*m^2 - Rawze - 05-05-2020,

RE: Into the @m*m^2 - kozakvod - 05-05-2020,

RE: Into the @m*m^2 - Rawze - 05-05-2020,

RE: Into the @m*m^2 - amermextrucker - 05-05-2020,

RE: Into the @m*m^2 - schISM - 05-06-2020,

RE: Into the @m*m^2 - kozakvod - 05-06-2020,

RE: Into the @m*m^2 - snailexpress - 05-06-2020,

RE: Into the @m*m^2 - kozakvod - 05-06-2020,

RE: Into the @m*m^2 - Rawze - 05-06-2020

RE: Into the @m*m^2 - kozakvod - 05-09-2020,

RE: Into the @m*m^2 - Rawze - 05-09-2020,

RE: Into the @m*m^2 - amermextrucker - 05-09-2020,

RE: Into the @m*m^2 - Lonestar10 - 05-09-2020,

RE: Into the @m*m^2 - amermextrucker - 05-09-2020,

RE: Into the @m*m^2 - Chamberpains - 05-10-2020,

RE: Into the @m*m^2 - JimT - 05-11-2020,

RE: Into the @m*m^2 - Precisionw900 - 01-04-2021,

RE: Into the @m*m^2 - Rawze - 01-05-2021,

RE: Into the @m*m^2 - Precisionw900 - 01-05-2021,

RE: Into the @m*m^2 - Rawze - 01-05-2021,

RE: Into the @m*m^2 - Chamberpains - 01-06-2021,

RE: Into the @m*m^2 - Rawze - 01-06-2021,

RE: Into the @m*m^2 - Precisionw900 - 03-17-2021,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design