Into the @m*m^2

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 05-02-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Into the @m*m^2

05-10-2020, (Subject: Into the @m*m^2 )

Post: #17

Chamberpains Offline

Offline

Contributing V.I.P. (2773 Likes)

Posts: 2,312
Joined: Jan 2018

Thanks: 1172
Given 2773 thank(s) in 1446 post(s)

RE: Into the @m*m^2

When your doing ANY kind of up hill pull or fighting wind, you can drop it in whatever gear that keeps your RPM's up in the 1800+ range all day long. You just want to upshift when your not pulling. Flat ground and down hill and such.

You find your foot pushing on the accelerator, then back down the in the gears it goes and RPM's up. And repeat about a 1000 times a day.

This is how you pull freight with out working the hell out of the engine. Its minimal stress and heat the engine is exposed to in order to complete the task. The fuel mileage and savings is in getting good at doing this over and over again.

Return to Top | find

Thanks given by:

kozakvod , amermextrucker , Waterloo

« Next Oldest | Next Newest »

Messages In This Thread

Into the @m*m^2 - kozakvod - 05-05-2020,

RE: Into the @m*m^2 - hookliftpete - 05-05-2020,

RE: Into the @m*m^2 - Rawze - 05-05-2020,

RE: Into the @m*m^2 - kozakvod - 05-05-2020,

RE: Into the @m*m^2 - Rawze - 05-05-2020,

RE: Into the @m*m^2 - amermextrucker - 05-05-2020,

RE: Into the @m*m^2 - schISM - 05-06-2020,

RE: Into the @m*m^2 - kozakvod - 05-06-2020,

RE: Into the @m*m^2 - snailexpress - 05-06-2020,

RE: Into the @m*m^2 - kozakvod - 05-06-2020,

RE: Into the @m*m^2 - Rawze - 05-06-2020,

RE: Into the @m*m^2 - kozakvod - 05-09-2020,

RE: Into the @m*m^2 - Rawze - 05-09-2020,

RE: Into the @m*m^2 - amermextrucker - 05-09-2020,

RE: Into the @m*m^2 - Lonestar10 - 05-09-2020,

RE: Into the @m*m^2 - amermextrucker - 05-09-2020,

RE: Into the @m*m^2 - Chamberpains - 05-10-2020

RE: Into the @m*m^2 - JimT - 05-11-2020,

RE: Into the @m*m^2 - Precisionw900 - 01-04-2021,

RE: Into the @m*m^2 - Rawze - 01-05-2021,

RE: Into the @m*m^2 - Precisionw900 - 01-05-2021,

RE: Into the @m*m^2 - Rawze - 01-05-2021,

RE: Into the @m*m^2 - Chamberpains - 01-06-2021,

RE: Into the @m*m^2 - Rawze - 01-06-2021,

RE: Into the @m*m^2 - Precisionw900 - 03-17-2021,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design