Compressor Inlet Temp sensor

[rapidisimo]

(05-10-2020 )Rawze Wrote:  My prostar has no blocking plug in the solenoid. It has a supply line, and the line going to the fan clutch... other port is completely open.

When I shut key off, air is all the way up, and engine fan is already in neutral state,.. it takes several seconds for the ecm to shut down. When it does switch off, I can hear a distinct and sudden release of air from the fan solenoid for about 1 seconds or so when the solenoid is switched off and then it stops.

Every prostar that has ever been over here has been the same way.

So, my solenoid probably needs to be replaced again, damn it.