Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Bad temperature gauge or sensor?

new reply
Bad temperature gauge or sensor?
06-28-2020, (Subject: Bad temperature gauge or sensor? ) 
Post: #22
Waterloo Offline
HMR-Contrinbuting V.I.P.  (4126 Likes)  *****

 		Posts: 4,617
Joined: Oct 2014
Thanks: 5334
Given 4126 thank(s) in 2094 post(s)
RE: Bad temperature gauge or sensor?
On my ProStar, the wire from the high pressure switch, roughly 6 inches or so from the sensor itself, has broken twice on me, I assume from engine vibration. Peel back the split loom and start there. That is assuming it is up there on top by the radiator.
Return to Top | find
replyreply
 Thanks given by: Meanwhile
new reply


Messages In This Thread
RE: Bad temperature gauge or sensor? - Waterloo - 06-28-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication