Wet exhaust manifold
07-06-2020, (Subject: Wet exhaust manifold ) 
Post: #12
RE: Wet exhaust manifold
(07-05-2020 )Armond96 Wrote:  ...
My dampener pulley is so rusty I can’t even make out the marks on it ...

Find a single mark A,B, or C ... and place a sharpie mark on the front face of the damper in front of that mark.

turn the enigne until the mark on the face is pointing straight down ... you will be very close to the next mark and can easily find it... repeat until all 3 are found.

a dremel with a flappy 120-grit sanding wheel turned down real low to gently dust off the rust is your friend... That or sand paper or scotch-brite pads.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: Wet exhaust manifold - Rawze - 07-06-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.