| Oil pressure dropping |
| 07-19-2020, (Subject: Oil pressure dropping ) Post: #4 | |||
| |||
| RE: Oil pressure dropping My first thought, looking at the age, weight and hours... Overhead and replace the bearings in the lower end, along with pressurizing the motor to check for coolant in the liners. I would replace the oil pump too if you roll new bearings in. If still mandated, it could also be carbon packing, or a bad delete eating the motor alive. If you have not done an EGR tuneup on that motor, you should do that regardless, along with the overhead. I would also bake and de-ash the cans if they are still in operation... I am assuming this is a CM-871? User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields. | |||
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.