Helping JimT out with an inframe ...
08-10-2020, (Subject: Helping JimT out with an inframe ... ) 
Post: #28
RE: Helping JimT out with an inframe ...
Amazing isn't it, hard to believe they can even last 100,000 mi.


User's Signature: im_seeing_parameters_in_my_sleep 1
replyreply
08-10-2020, (Subject: Helping JimT out with an inframe ... ) 
Post: #29
RE: Helping JimT out with an inframe ...
That looks like more than 500k of normal egr soot. You have some stalactites and stalagmites growing in that cave.. It looks like it was getting coolant or oil swirled in there.
replyreply
08-10-2020, (Subject: Helping JimT out with an inframe ... ) 
Post: #30
RE: Helping JimT out with an inframe ...
My 870 looked like that at 450K


User's Signature: im_seeing_parameters_in_my_sleep 1
replyreply
08-10-2020, (Subject: Helping JimT out with an inframe ... ) 
Post: #31
RE: Helping JimT out with an inframe ...
My cm870 looked soot packed but not that bad at 700,000 and it ate its own waste the whole time.
replyreply
08-10-2020, (Subject: Helping JimT out with an inframe ... ) 
Post: #32
RE: Helping JimT out with an inframe ...
That looks familiar for some reason... let me think
replyreply
 Thanks given by: Waterloo
08-10-2020, (Subject: Helping JimT out with an inframe ... ) 
Post: #33
RE: Helping JimT out with an inframe ...
Too familiar...


User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields.
replyreply
08-10-2020, (Subject: Helping JimT out with an inframe ... ) 
Post: #34
RE: Helping JimT out with an inframe ...
Yikes! I bet mine is just as bad. It is crazy they can still breathe all gunked up like that.


User's Signature: Anti-seize EVERYTHING, Except injectors...Use Petroleum Jelly!!!
replyreply
08-11-2020, (Subject: Helping JimT out with an inframe ... ) 
Post: #35
RE: Helping JimT out with an inframe ...
I'm curious what Rawze or Mr. Hagg think of that intake soot. To me those valves look very bad and a little wet (could be the flash of camera) and I'm quite surprised chunks of carbon didn't destroy the engine and turbo. My curiosity isn't to argue but more to have it compared to other engines and intakes that may be worse or better. Where does this one fall in to spectrum.
replyreply
08-12-2020, (Subject: Helping JimT out with an inframe ... ) 
Post: #36
RE: Helping JimT out with an inframe ...
Any updates? Did you find any stand out problems?
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.