Helping JimT out with an inframe ...
08-24-2020, (Subject: Helping JimT out with an inframe ... ) 
Post: #56
RE: Helping JimT out with an inframe ...
Any issues found when cutting the lowers in that 152 block? I seem to run into cracks much deeper than .032 on those.
replyreply


Messages In This Thread
RE: Helping JimT out with an inframe ... - Agentspd - 08-24-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.