Helping JimT out with an inframe ...
09-21-2020, (Subject: Helping JimT out with an inframe ... ) 
Post: #96
RE: Helping JimT out with an inframe ...
If you had your turbo rebuilt make sure the turbine housing clamp is tight (about 13ft lbs) might be slightly loose so you can have the center housing clocked properly when reinstalling it.
replyreply
 Thanks given by: Waterloo


Messages In This Thread
RE: Helping JimT out with an inframe ... - marek4792 - 09-21-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.