Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Your Daily Blog / Helping JimT out with an inframe ...

new reply
Helping JimT out with an inframe ...
09-26-2020, (Subject: Helping JimT out with an inframe ... ) 
Post: #105
Lonestar10 Offline
HMR-Contrinbuting V.I.P.  (1211 Likes)  *****

 		Posts: 1,871
Joined: Oct 2018
Thanks: 13
Given 1211 thank(s) in 779 post(s)
RE: Helping JimT out with an inframe ...
what i would think looking at how the fuel flows into and outn of the davco for davco to have low level due to air your truck would run like poop. what it could be is there is a restriction from the tanks to the davco causing the fuel pump to have to suck harder which would pull fuel through less of the filter due to the extra vacumm

User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Helping JimT out with an inframe ... - Lonestar10 - 09-26-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication